From the brand
We created the original VariDesk to relieve a work colleague’s back pain. It went on to set an industry standard and now, trusted Vari products are in over 98% of Fortune 500 companies. Today, Vari offers flexible office furniture to help create happier, healthier workspaces.
Shop VariDesks
Shop Electric Standing Desks
Is Vari the same as VariDesk?
We are formerly VariDesk but since we offer much more than a desk converter, we had to change our name.
Are Vari Products Certified?
We’re committed to quality. Where applicable, our products are made to the highest standard, qualifying for the industry’s leading product certifications.
Shop the Essential Collection
Shop Ergonomic Office Seating
Vesa-Monitor Stand: The Vari Dual Monitor Arm is a secure and flexible way to free up desk space and lift two monitors off your worksurface. Designed for monitors up to 27″ wide (68.5 cm) and 30.9 lbs with a VESA standard compatible display mount (75x75mm or 100x100mm). Recommended for monitors with a 16:9 aspect ratio.
Ergonomic Desk Design: The double monitor arm allows you to raise screens to 12″ off the desk surface and tilt, angle, turn, or rotate the two monitors to a comfortable position. The double monitor mount will promote better posture, as placing both screens at eye level when sitting or standing can help reduce neck pain and eye strain.
Adjustable Arm Stand: Each arm is fully articulating, allowing you to make any adjustments necessary to achieve an ideal viewing position. Move the 360 degree rotating monitor arms effortlessly with the tension-assisted adjustment mechanism. The sturdy design takes up minimal space on your desktop while securely holding your monitors in place.
Easy To Assemble: The dual monitor riser takes only minutes to install so you can get back to work faster. Attach the universal desk clamp to any desk or table up to 1.375” thick to free up space and add organization to your workstation.
Whenever you purchase a Vari product, you receive quality, convenience, and a purchase that you can feel good about. Dual Monitor Arm Stands come with a fantastic 5-year warranty, so you can be sure you’ll love them.
Milo –
GREAT AND VERSATILE
The versatility in this mount is fantastic! Perfect for ANY triple monitors set up. The combos I have tried, have been:- 1 curve + 2 24 in. Monitors- 3 24 in. horizontally- 2 24 in. Horizontally configured and 1 24 in. Vertically to the side.Install Tip: Have a socket wrench handy with a 10mm hex bit handy. Some of the tension screws were a bit stubborn to loosen/tighten with the supplied Allen keys.
Betsy –
Professional Space Saver
These dual monitor arms are just what you need if your monitors take up lots of space on your desk. They were easy to assemble and install. My head is now clear because I removed the clutter that was on my Varidesk and driving me crazy. These arms are sturdy, easy to adjust and maneuver, and look sleek and professional. The positioning and height are perfect. I can easily adjust the monitors to fit my needs whether I am sitting or standing. If you work with dual or triple monitors, these are the arms for you. I have the dual monitors connected to my laptop. They are a little pricey, but for me, it’s an investment and was worth it from a sanity and productivity perspective. I am not fumbling with the papers and other items on my desk that get crammed because my dual 29 inch monitors took up so much space. I hope this helps you make the decision to purchase these dual arms. They are worth it!
Casajanak –
Easy to install
Dual monitor arms were easy to install and work great.
Eff Emm –
This was GREAT until I raised my standing desk
There is no doubt that this is a sturdy, high quality monitor arm. The laws of physics are its only downfall.I had no problem assembling and installing this on my Vari desk. Adjusting the tension in each arm, to accomodate the light weight of my monitors, was very easy too. The cord storage was awesome, no more cluttered desk area.When using the monitor arm, while my desk was in the lowered position, everything was perfect. Stable, sturdy, they were at the perfect height. I raised my desk to the standing height, and that’s when the shaking began.I don’t bash my keyboard, but even the most normal of typing, or even gently bumping up against my desk, caused the monitors to bounce. My desk is in a carpeted room, which probably doesn’t help either. The carpet, combined with the height of the raised desk, combined with the length of the monitor arms causes the bouncing.I chatted with Vari support, and they suggested reducing the tension on the arms (I tried that, didn’t help), and also placing something very heavy on my desk to stabilize it. There’s not enough room to put anything of substantial weight on the desk, so that’s not a solution for me.Sadly and reluctantly, I returned it. This would be a perfect solution for someone who doesn’t use a standing desk, or maybe even if your desk is on a hard surface rather than carpet.
Sylvester Alexander –
Monitors Screen height
Twin monitors support lift. These are neat and awesome with right height for working on the computer daily.
Hannah –
Initial assembly a challenge, Still a great investment 2 years later!
Edit 2 years later: I had to disassemble and reassemble this (without removing the monitors), and I was blown away by how easy it was, how the arms snapped cleanly in to place. I feel like this was a great investment.Additionally, screen wobble isn’t an issue. Make sure to tighten everything.Assembly wasn’t flawless:1. The monitor screws are kind of long. There is about a quarter inch between the back of the monitor, and the bottom of the screw head. At the hardware store, I got some plastic spacers (1/4″ thick) and they helped fill that space.2. The silver, swivel ball on the monitor Bracket is really difficult to use. Like, my screen is flexing and will probably break before I could get that ball to move. Try to move it from the back-side of the monitor or by only using the arms (rather than pulling down from the front) to get it down. I also had to disassemble the bracket from the monitor, and play with the ball to get used to how much force it requires.3. The screen wobbles when I type normally. The arm is mounted to the Fully Jarvis desk, 48″ long by 30″ deep, and 3/4″ thick.Edit: Adjusting the arm screws to be tighter has reduced the screen wobble when I type. Other suggestions were to add bushings at the joints to dampen vibration (not sure dimensions of those bushings), and to get a keyboard tray.
sj –
Phenomenal product
Look, this product is more expensive than competitors of no-name random brands you find on amazon. This product is a lot more money. However, do you really want to pay a fraction for something that may not even work? A fraction for a mount that might not hold your monitors? I paid a lot for my monitors and I didn’t want to gamble with a cheap mount that MAY work or may fail while I am sleeping. I didn’t want to buy a product where the manufacturer wouldn’t stand behind their product or ignore me. Vari is a reputable brand and stands behind their products. One of the plastic pieces of the mount I purchased was a bit loose and I emailed Vari. Vari immediately responded and remedied the satiation (they sent me a new piece within days).This product is high quality and will last a long time. I have no doubt in my mind. The product is very sturdy, looks great, and supports my monitors. There is some annoyance in initially adjusting the “setting” to allow for easy movement on the monitors (tilt, up/down etc) but once you configure your monitors then it is not a problem. I am happy with my purchase and recommend. I’ve owned for about 6 weeks.
Karen –
Good quality. Very easy to install.
Robin Hood –
perhaps a little pricey but quality build and does teh job perfectly.
Saraka –
The build quality of the product and the ease of installation make it worth every penny. I was also able to set up a configuration where my main screen is perfectly centered, which is fantastic. While the “feet” of the monitor arms need to be quite offset, it still works well!My only critique is that I’m using a countertop as a desk, which is very close to the clamp’s limit (1.375 inches). It would be great if Vari offered an option to make the arms compatible with a wider range of desk thicknesses—even if it meant an additional cost.
Douglas Carsted –
Works well with 27 inch monitors. Once the springs are adjusted I taped the two monitors together with gaffer tape so they move in unison.
Basketball Manitoba –
A nice add on with the desk. Holds up well.