From the brand
FLASLD Heat Shield
Heat Shield Cover Wrap as an excellent heat barrier also can protect the hood, hoses, and painted surfaces from residual heat damage.
Aluminized Heat Shield
Heat Shield Mat Thermal Barrier Adhesive Backed Heat Blanket
Heat Shield Barrier
Titanium Turbo Cover
Fireshield Titanium Turbo Blanket Heat Shield Turbocharger Blanket
Titanium Turbo Cover
Aluminum Heat Shield for Grill
FLASLD Aluminum Heat Shield Mat Fireproof Cover and Screen Protect Deck Railing from Grill
Heat Shield for Deck Fence
Outdoor Grill Smoker Cover
Outdoor Grill Smoker Cover
Withstands Extreme Heat — Made with aluminized finish which is flexible and durable woven silica, this Aluminized Adhesive Backed Heat Barrier can withstand scorching temperature above 2000 degrees Fahrenheit. Its reflective surface can still screen off the heat and provide utmost protection.
Reflects 95% of Heat — Keep the back of the heat shield at a normal temperature to prevent damage from high temperature, Capable of reducing up to 95% of radiant heat.
Suitable Size — We offer five different sizes, 12 x 12 inch, 12 x 24 inch, 12 x 40 inch, 24 x 24 inch, 24 x 40 inch, thickness: 0.032”(0.8MM). You can choose the size that is more suitable for your project, you can simply trim the sheet into wanted shape or size to satisfy your various projects.
Convenient to Apply — Innovatively designed with adhesive composite on its back, the heat shield protection barrier cover can be easily wrapped or laid on to any desired surfaces with a professional-like finish, make it clean and tidy, also a penny-saver from hiring service.
Multi-Purpose Adhesive Backed Heat Barrier — No matter what area of your Automobile or Home needs heat prevention; this barrier can be of sure help. May it be plastic components, painted surfaces, hoses, firewalls, refrigerator, cabinets near ovens, car bottom insulationdoors, hoods, and a lot more.
Reaxions –
Used Between Sheets of Durock
I’ve used adhesive-backed aluminized heat shields like these for many years in automotive applications, but I used this item for a different application… I’m finishing an outdoor kitchen build and used this between two layers of 1/2″ Durock (cement fiber board used in construction of showers, etc.) to prevent the heat from my built-in grill from radiating to areas with flammable materials.Why did I choose this approach? Because the grill companies want $1,200+ for a grill liner which is basically just some stainless steel sheet welded together at the the appropriate dimensions. Yes, I used metal studs to build the grill section, but I used pressure-treated wood everywhere else because it’s soooo much easier to work with (at least for me). A single layer of 1/2″ Durock and metal studs alone probably would’ve sufficed, but I always tend to overengineer things, and since I was so familiar with this material, I figured the extra layer of reflectivity back to the grill, in addition to another layer of Durock, couldn’t hurt. I even ended up using another 1/4″ layer of Durock all around to fill in the spacing a tad.The large sheet size in which this item was available made it perfect for my application. Yes, it was folded, but I was able to get it flattened out pretty easily, and for this use case, a purely aesthetic wrinkle line wouldn’t matter. It was a great value and adhered very well to the smooth side of the Durock. I used Loctite PL Premium 3X to bond the reflective side of it to the other layer of Durock, and it worked great. Cutting it was easy with some normal office scissors, and when I trimmed the Durock sandwich with this in the middle with a masonry blade (both angle grinder and circular saw), the heat shield presented zero problems.I’d definitely purchase this again, and will probably proactively buy another large sheet just to keep on hand for future projects.
Kato –
Great for protecting your under cabinets from heat and steam.
These cut easily and have great adhesion so they are easy to install – even in an awkward place like under a cabinet. I installed mine six months ago and they still look great. I use mine over my airfryer so the heat doesn’t effect my cabinets. Love it!
Leo –
Sticks pretty well, but add some of your own adhesive if in the engine bay
I put this to cover my evaporator housing in my engine bay on a 2006 Ford Crown Victoria after the original insulation more or less, turned in to dust. Just know that you may want to get some 3M adhesive spray as the adhesive on these mats are tacky but they do start to peel off a bit. They don’t fall off though, just the edges and such are starting to peel back. But know, these are right up against an exhaust manifold for a 4.6L V8 engine. Maybe 3 in ches away? Pretty good for my install though. Cuts well and conforms as needed.
Sue N –
Works better than expected
I bought this due to the poor design of my kitchen and just purchasing a new fridge. The side of the fridge would get hot so I didn’t like using those gas burners. This is a game changer!!! I no longer feel like I’m taking life off my fridge!!! Definitely worth it… not beautiful but a great heat shield.
Lori E –
Perfect For What I Needed!
I bought this to cover the side of a cabinet where steam/heat from a dishwasher was starting to cause damage. This was very easy to apply and the adhesive seems strong – the sheet didn’t shift at all while I was installing. I paired this with some heat shield tape and it all seems to be doing the job. I probably should have ordered one more sheet to cover the entire cabinet side but I was able to cover the areas where I could see damage with no trouble.
ED PENNINGTON –
Good heat disapation
Used on the bottom of my 75 inch flat screen TV, mounted above gas fireplace, it helped with the heat hitting bottom of T v enough for me to watch TV with fireplace on. Good product.
Palladian –
Works great under cabinets
Does a great job protecting my cabinets from my toaster oven. Adhered easily with no issues.
rjv –
Nice product but not sure about its actual heat shielding properties
Nice product. Looks good, feels good, easy to cut and good adhesive backing. Unfortunately I can not say the same about its actual heat shielding properties. I’m using this as a heat shield on the underside of a shelf in a hifi stereo rack to protect the equipment on top of the shelf from a hot power amp on the shelf below. There is about 2 inches of distance between the top of the amp and the underside of the shelf where I applied the heat shield. The shelf is open on 4 sides so there is ample space for air flow. The top of the upper shelf is still getting very hot. It is a few degrees cooler than the top of the amp, which I would expect with the 2″ air gap and the air flow. I guess I had expected a bit more of a heat deflection and shielding effect, but perhaps this is not the right kind of application for this product. It looks very professional though! 🙂
Vicente –
Aún no lo he probado pero parece muy bueno.
Bernhard –
Klebt gut und schützt vor Auspuffhitze
Fabri Erut –
cumple con lo que ofrece!!
Gregory jeffries –
Fantastic quality. Super strong adhesive. Deflects heat well.
philippe jacob –
Isolation admission air mx5 2001