VIVO Premium Aluminum Height Adjustable Single Monitor Articulating Desk Mount Stand w/Gas Spring Arm Fits up to 32″ Screen (STAND-V001Q)

Budget frendly and great quality.
Looking for a good arm for my monitor without spending the $200 price tag from ergotron. This vivo arm is so cheap and it looks so good with it’s matte black finish. Installation was a breeze and got more room on my desk for my speakers. I have had it for 6 months and no wobbling, the spring hasn’t diminished and keeps my monitor right where I need it.Originally I bought this because I wanted an arm that was height adjustable and didn’t bump into my desk drawer 4″ tall. the base is high enough it clears with an extra .25″ no problem.

Extremely good for the price.
This is the identical product a different company (starts with f, from pacific northwest) is selling for three times the price, It can also be sourced historically from another retailer with mono in the name 🤫. For the price I recommend doing some small work on it to make it funciton like a $3,000 arm.1. Take apart the two main swing joints and drench the plastic parts in silicon grease. (warning: middle joint is extremely hard to put back together because of a fitted washer that barely grabs onto it’s target)2. Place a thin nylon washer in between the bolt and metal washer of the tilt joint (right behind monitor). This is by far the only bad joint of the system because it’s not spring assisted so it’s harder up than down, nylon smooths it out a bit.3. Once you are very sure you are happy with it’s position, drill a tight hole in your desk and use the drill hole mount, it’s WAY more secure and solid and you won’t have your monitor tipping down at full extention anymore.Only downsides that you can’t really cure is that the foot of the base only has four tiny rubber feet, so you’re going to eventually have the shape of the sharp metal rim imprinted in your desk, and the tilt joint sucks.

Great Stand
I finally decided on this arm after seeing negative reviews at the top of every monitor arm/stand I could find. I figured going with a metal one was a better bet to reduce wobble and better secure my somewhat expensive Zowie monitor. I could not be happier with my purchase, it cleared up A TON of room on my desk compared to the fat stand that came with my monitor. I don’t really move my monitor at all, but I was able to place it exactly where I want it and just leave it there. It was fairly straight forward to set up even coming from someone who has no prior experience with anything like this. The only thing worth mentioning is that the part that controls the up/down tilt had to be tightened pretty tight until it would hold. I wasn’t sure I was doing it right because it didn’t seem to move much, but it definitely does tighten.I believe almost all the bad reviews must’ve just been people who got a bad unit which can be easily returned or replaced through Amazon’s generous return policy. It is not fair at all to give the company no chance to fix any issues which many reviewers seemed to do. Something I can say is the arm is fairly hard to move when the arm is not anchored to anything, which is probably the cause for some of the complaints about it being too stiff. It’s likely that some units are actually too tight, but for my unit, once I attached it to my desk, it’s fine. It’s still firm, but very easily movable with just one hand. The upper arm moves by just pulling on the monitor, but the lower one I would adjust by hand if you ever need to move it. Similarly, some reviewers just didn’t read any instructions and don’t understand that you have to tighten a bolt to increase the pressure of the pneumonic arm. It is not supposed to hold up the monitor out of the box, you are supposed to adjust it to suit your monitor’s weight. It’s not extremely obvious which way is loosening or tightening, but worst case you can just try both until it works.One thing to note is that you will need probably about an inch of clearance behind your desk, so your desk cannot be pushed flush with a wall if you are attaching this to the back. It was very easy for me to just move my desk a tiny bit forward to get around that. Just make sure you’ve considered that before buying in case you’re unable to move your desk to accommodate. Other than that, my desk is slightly curved in the back but it still clamps on very sturdy and I have absolutely no worry that it won’t hold.Overall this is a very good product and I will definitely be buying another if I decide to get another monitor. If you’re on the fence because of some bad reviews like I was, I am confident you will not regret buying this.

Great monitor arm at a great price! Couldn’t be happier with it!
I bought this product as my first VESA mounting arm. I was in the process of moving my home office into a different room and wanted the freedom to move my monitor around while at my desk. After searching around for a while I saw this arm and decided to buy it because of the affordable price. I figured that if it turned out to be a disappointment, I would not have lost much. When i received the arm, i was very impressed with the feel and build quality. It was very easy to assemble and calibrate to my monitor, and even has the included hardware to be mounted through the desk instead of just clamped despite that not being advertised on the product page. This arm is currently holding a 34″ ultrawide monitor from lg and has absolutely no issues, even though it is only advertised for monitors up to 32″. There is minimal monitor shake while typing or moving about, and i attribute the little shake there is to my less-than-stellar desk. The integrated cable routing is absolutely fantastic for my setup as well. It is easy to use and really adds a professional and clean look. I would recommend this arm to anyone looking to clean up their desk setup or gain the ability to easily move your monitor around your desk

Es robusto discreto minimalista y facil de instalar, definitivamente el mas bonito y util que hay

Ok arm but the ability to rotate it is really bad, tongues and no way to adjust. Two stars for the shorty return service, would cost as much to send it as the item costs and Amazon would not reimburse that.

I paid for two of these arms. I did a lot of research and I went initially with Invision arms which were absolute trash they’re bad quality and have no reach. These VIVO arms on the other hand have excellent cable management, are made of pure metal and look absolutely stunning.The reach is exactly as advertised up to 23.5 inches and setup was really easy. Definitely worth it.