From the brand
Board Compatibility: Fits screens up to 45 inches and 4 to 44 lbs. VESA (75x75mm, 100x100mm) compatible, ideal for most monitors (BenQ, HP, Dell, Samsung, LG, ASUS, Acer), plus webcams and light bars.
Exceptionally Consistent Sturdiness: Built with an optimized tilt structure and gas spring tested for 25,000 cycles, ensures reliable support and prevents sagging for long-lasting performance.
Desk Protection: Steel monitor mount reinforcement plate for thin, glass and other fragile tabletop, bracket plate protects desk from scratches and deformation, providing long-term surface protection
Easiest Installation: Quick setup with top-mounting C Clamp or grommet. Tailored packaging makes assembly simple. Includes a quick-release VESA plate and factory preset tension for easy adjustments.
Full Motion: Arm extension up to 22.4″. Adjust with +50° to -20° tilt, 180° swivel, 360° rotation, and height from 8.7″ to 18.7″, built-in cable management keeps Clutter-free desk.
NT –
Expensive and bulky but great for the requirement
Challenging to setup but works great. I used the steel reinforcement plate. The instruction manual shows the plate with an image of it sitting flush, I don’t think that’s possible to achieve with the steel plate, maybe on a desk with less height. From the picture it looked like my desk supported the arm despite not being solid wood, but I didn’t risk it.Outside of that tedious but easy setup. My monitor already had some vesa screws, so I had to unscrew those and put in the included plate. The included plate did not snap into my monitor so if you don’t hear a snap sound you’re still fine, you just put in the small hand screw and I’ve had no issues.There’s also a 180 degree and 360 degree optional adjustment, in case your monitor arm will be close to a wall. I used the 360 degree even though I’m close to a wall.I haven’t figured out how I’m going to disassemble this when I move so expect to take most of it apart again.As for the resistance screws, less is more. So be careful even the slightest turn greatly increases or decreases tension.The arm itself is super sturdy, looks great, feels great.It saves a decent amount of space under the monitor but with the reinforcement plate it’s definitely a little bulky. This is also expensive so not great value, but more a premium product for monitors you really care about.I wouldn’t use this on anything below 27″ I would go with a cheaper option. Also if you like flexibility of adjustments get 2 individual arms instead of a dual arm mount. This way you can space them apart how you like perfectly.The 3 year warranty from benQ here is WEAK. Stand behind your product with a 10 year warranty. benQ has always been cheap on warranties.Anyway, not sure if this is OEM or not, but it’s definitely a solid monitor arm and I’m happy to use it on my 27″ gaming monitor. I also bought a cheaper 2nd arm for my work monitor but have yet to install it. Buying two of these would be pretty bulky and expensive. There’s definitely lower profile arms out there but this one supports much heavier weight and sizes so that checks out.The included cable routing is VERY hard to use if you have MORE than 2 cables on your monitor. For example a lot of users have power and then DP, but if you add another DP or HDMI then it struggles for space ESPECIALLY with the newer DP 2.1 cables and 54gbps+ those cables are THICK due to the increased bandwidth (or at least that’s what I think) and it was very hard to route.Also ensure your cables are long enough using the included routing takes a big chunk of slack away from the cable, I had to buy a 9 FT DP cable to reach my PC.
Sally Blanton –
Excellent Monitor Arm
Excellent build quality. It is very, very sturdy and holds my 34” ultra wide with ease. It could handle a lot more weight no problem. Adjusts very well, it has a nice feel. Pleasing design and easy to assemble. Great value and strong recommend.
N –
Rock solid, easy to use even with heavy monitors.
This is a fantastic arm for the price, and even ignoring the price, it’s the best I’ve ever owned. The design is aesthetic and full of thoughtful touches. The assembly and installation were as simple as they could be. It’s easy to adjust and very stable supporting my 38″ (9kg / 20 lb) monitor (Asus PG38UQ). Also, as an FYI: the adapter plate accepts up to an M6 screw with no interference issues, so even if your monitor uses a non standard screw thread (standard is M4) on the VESA mount, you’re good. I have a 1.5″ MDF desktop and the included reinforcement plate fit perfectly and gives me good peace of mind.
Keith –
Well Built with a Couple Minor Issues
Bought 4, but I’m returning two because these don’t work for my setup.Minor issue is that the top reinforcing plate has a 1/2” lip, so you can’t use it as intended when you install by drilling. I turned the plate over, but the lip interferes with placement of other items. I may route a 1/2” deep dado later so the plate lip is out of the way.Another issue is unless you have room behind your desk, the monitor will be off-center from the base by about 6”. I drilled the holes based on the monitor being centered to the base, but my desk is against the wall so I can’t center the monitor to the base because of the limited travel of the monitor arms. This limits side-side adjustment. I will probably route a 4-5” slot in the desk so I can adjust sideways. The desk is custom built with 2” the top so the slots won’t weaken it.If you plan on attaching to the back of your desk, you shouldn’t have any issues. Just be aware that the base will be off-center if you have no room behind your desk and adjust accordingly.This monitor arm is well built and sturdy that will hold your large monitors. Assembly was simple & quick.I like BenQ products and have 3 Halo lights that work great also.
James Moger –
Well-designed arm
I’ve had 3 sets of monitor arms. All of them have been decent. This one is spendier than the others I have purchased, but it is a very nice arm. Sturdy & easy to use. I paired it with the BENQ 28.2″ coding monitor and am using it in a single monitor setup, instead of the (2) 24″ smaller monitors I used to use.
adrockthemc –
Excellent monitor arm
This monitor arm is 10/10. The quality is top notch, it works perfectly, it’s beautifully made, I can’t recommend it enough.
Yong –
Great monitor arm.
Installation is easy and quality is very good.
Erik Wahl –
Best arm I’ve used so far
Nice design. Works as intended. Holding a 5k2k 45inch with zero issues.
猫又 –
土台もアームもしっかりしてる。32インチのモニター繋げてるけど、だんだん下がるとかもないです。組み立ての時はパーツ探すの大変だけど、このアームは順番ごとにパーツの袋が綴りになっていて探す手間が無かったです。説明書も図が分かりやすくて結構早く組み立て出来ました。組み立て時が1番感動してました！
Mohamed H. –
ممتازه جدا
Ok Mogu –
スマホ首改善のために買いました。補強プレートはかっこ悪いです。BenQのモニターに付けたのでデザイン的に違和感がありません。テーブルの裏側の形状のため端迄つけられませんでした。元々のモニタースタンドの中心に穴を開けました、9cm左にズレました。
Gadget_Traveler –
『ベンキュージャパン BenQ BDH01 デュアルモニターアーム/ブラック/35インチ以下対応…』を入手しました。オフィスのモニターアームのアップグレードとして使っています。届いた箱の重さが、全てを物語っています。頑丈そうなパーツの組み合わせで、安心感が半端ありません。組み立ても難しくなく、1人で作業して、開梱からモニター設置完了まで、40分ぐらいで終わりました。設置したのは28インチの普通のモニターと、VESA対応の22インチのモバイルモニターです。モバイルモニターは、ベースを回転させて、縦位置で使っています。まず、全く揺れません。素晴らしい剛性感です。ただしその分、片手で向きをさっと変えるなど、軽快に使うことはできません。両手でしっかり持って、ポジションを決めていくことになります。これは用途によって利点でもあり、欠点にもなるでしょう。設置の注意ですが、なにせアームが重いので、家庭用の天板の薄いデスク、特にMDF素材だと、アーム+モニターの重さに耐えられないかもしれません。補強板も付属しているのですが、重さのかかるポイントは分散できても、重いことには変わりません。もちろんオフィス用のデスクなら、なんの問題もなく設置できます。それと安物と違って、工具類が全部付属なのは良いですね。なお、付属のVESAプレート取り付けネジが長いので、最近の、ネジ穴の浅い薄型モニターだと、ネジの長さが余ってしまいます。モニターに付属していたネジがあれば、それを使いましょう。動きが軽快ではないので、それを求めるとがっかりすると思いますが、ポジションを一度決めたら、しっかり支えてほしいという用途なら、これまで使ってきたモニターアームの中でもダントツです。おすすめします。
ガンテツ –
高いだけあって丈夫だと思います。ただ組み立てが面倒！そして重い！丈夫な机に設置してください！